Configuring a TP Link Rostelecom router: step-by-step instructions in Russian. Self-configuration of a TP Link router for a Rostelecom provider The tp link modems do not work Rostelecom

In this guide, we will take a closer look at how to set up a TP-Link TL-WR841ND Wi-Fi router for the following most popular Internet providers in Russia:

• Beeline
• Rostelecom

The following configuration steps will be considered step by step:

• How to connect TP-Link TL-841 ND
• How to enter the settings and set the connection parameters for Beeline or Rostelecom
• Configuring Wireless Security (Wi-Fi Password)
• Setting up television Rostelecom and IPTV Beeline

In general, you can start: setting up the router is unlikely to take you more than 10 minutes.

How to connect a router

On the back of the TP-Link TL-WR841ND wireless router there are five ports, one of which is designated WAN - you need to connect a Beeline or Rostelecom cable to it, depending on which Internet provider you use.

Also, the device comes with a short network cable: use it to connect one of the LAN ports on the router to the network card of your computer or laptop. The setup can be done without using a wired connection, via Wi-Fi, but if possible, use a wired connection.

Another important point: during setup, the Rostelecom (High-Speed ​​Connection) or Beeline (L2TP) connection on the computer itself must be disconnected - you do not need to connect it and after you have configured the router, it will independently establish the connection and only then "distribute" it to other devices.

And the last thing: if in the next step you fail to enter the settings web interface,.

How to enter the router settings

To enter the web interface of TP-Link TL-WR841ND settings, launch any browser and enter 192.168.0.1 or tplinklogin.net in the address bar, and when you are asked to enter your username and password, use admin for both. Note that the default login information is on a sticker on the bottom of the wireless router.

After logging in, you should be on the main page of the router settings. On some devices, it is present only in English - I will give the names of menu items in two languages.

Configuring TP-LINK TL-WR841ND for Beeline

To set up a connection to the Internet Beeline, in the menu select "Network" - "Internet" or "Network" - "WAN". On the page that opens, you need to enter all the connection settings for Beeline, namely:

• A typeWAN connections(WAN Connection Type)- L2TP or Russia L2TP
• Username and password (UsernameandPassword)- data from home Internet Beeline
• Server name orIP address (VPNServername)- tp.internet.beeline.ru

Save these settings, it is not necessary to change anything else in them. If the settings were entered correctly, and the Internet is not connected on the computer itself, then in a minute the router will establish a connection to the Internet, you will be able to open sites on the computer, Skype will connect and so on. You can proceed to configuring the parameters of the wireless Wi-Fi network (further, after describing the settings for Rostelecom).

Configuring TP-Link TL-WR841 ND for Rostelecom

To configure the Internet for Rostelecom on TP-Link, go to "Network" - "Internet" (Network - WAN), then on the page set the following connection parameters:

• A typeWAN connections- PPPoE
• Username and Password- your username and password from the Internet that you received from Rostelecom
• Secondary connection- disable
• ModeWAN connections- connect automatically.

Save your settings. After a minute or two, refresh the page and you should see that the connection status has changed to "Connected". It means that everything was done correctly.

Setting up a Wi-Fi network

To configure the wireless settings, open the Wireless menu item and then Wireless Settings. On the page that opens, enter a name for your Wi-Fi network (SSID). The name can be anything, by it you will distinguish your network from others. Just don't use Cyrillic. Save the settings.

Open the item "Wireless Security" and set a password for Wi-Fi:

• Select WPA-Personal / WPA2-Personal
• In the “PSK Password” item, enter a password of at least 8 characters, not containing Russian letters.
• Save the settings.

After applying the settings, you can connect to the router from a laptop, tablet or phone via Wi-Fi and use the Internet.

Internet connection technology ADSL became widespread. And on the periphery, in the villages, there is often no other alternative to entering the worldwide network. It is for this reason that the tariffs of providers for villages are very high. But this is not all the costs. Due to the fact that telephone lines and power lines in villages are overhead, very often due to short circuits, thunderstorms, modems fail.

As it is not on the shore, I turn it off, disconnect it, but every year my modem burns during summer thunderstorms. I never found a telephone socket with a lightning protection on sale, I adapted this filter from the UPS:


And this summer the modem remained intact. But in the fall, with a strong wind, there was a power surge and my modem stopped working.

The choice of a new model was not so great, in general, it took what was: TP-LINK TD-W8961ND.
Model from ASUS with the same functionality it cost almost a thousand more, and the model from D-LINK, at the same price it was simpler, and an interesting design at TD-W8961ND attracted attention.

Packaging, equipment.

The bright color box provides very comprehensive information about the device. High speed wireless secure connection and lightning protection!

Inside is another box, and in it is a cardboard box.

In addition to the modem itself, the kit includes two detachable 3dBi antennas, a splitter, a network cable, two telephone cables, a network adapter with a wire of about two meters, a CD with a utility for quick installation and a manual.

Specifications

Appearance.

The modem has an original design: a trapezoidal shape with rounded corners and small thickness, an abstract pattern with ventilation holes, make it a stylish interior detail.

At the back there are 4 LAN ports, an ADSL socket, a power socket, WPS protection, reboot and WI-FI buttons.

On the top panel there is a light indication.

The size of the device is 195 x 130 x 35 mm, and the length of the antennas is 200 mm.

There is a possibility of wall mounting.

Connection and configuration.

If you still have a floppy drive, and apart from an Internet connection, nothing is required, then you can insert a CD and the setup wizard will help you quickly connect to the Internet.

But we will go the proven way and make the settings through the web interface. Enter in the address bar 192.168.1.1 then the password and administrator login, by default admin, admin. Then we get to the main menu.

Firmware update is not required, the latest version is from 04.09.2012 and, which is very convenient, in Russian.
The paper user manual is not very informative, we will carry out the setup based on our experience, and this is what I did, though not the first time.

The first step is to set up wi-fi and set a password on it, the ability to set a password appears after choosing the WPA2 encryption type.

7 rules have already been written in virtual channels, so much is not required, I deactivate everything except the zero and the first.

In PVC1 we prescribe VPI - 8, VCI - 35, bridge mode, this channel will be for iP TV, the values ​​are given for the provider Rostelecom Khabarovsk, check other values ​​with your telecom operator.

In PVC0, we prescribe the PPPoE rule VPI - 0, VCI - 35 and specify the login and password for access to the Internet, do not forget to save at all stages of the settings.

This is what we should get in the "state" tab.

Then you need to activate the VLAN groups

Grouping interfaces for Internet and iP TV

We save all the settings, if something does not work out, we reset all the settings to the factory settings and try again.

And so, to summarize: on the first three ports I have the Internet, on the fourth port there is a set-top box, well, wireless communication throughout the house and in the yard, and even from a neighbor across the street.

At work.

As I wrote above, in the house across the street, at a distance of about 100 meters, the laptop, although barely, catches the signal, the antennas are very powerful, the previous modem DSL-2650U he was not capable of that.

Antennas, if desired and necessary, can be replaced with more powerful ones, I set it to 5 dBi, lay idle.

And when using an external antenna with a laptop, the signal is stable, I share the traffic.

But the neighbor had to fork out for an external Wi-Fi adapter and an external antenna, which he connected to the adapter via an extension cord and hung it on the roof. It so happened that all the equipment was bought by TP-LINK.

If anyone is interested in deploying a wireless network, then this is a perfectly acceptable solution. I think the signal will be caught at a greater distance.

All devices connected without problems. Television runs without brakes, even in HD quality, I watch 3D films through smartTV, although for such a stream, 4MB of speed is not enough.

But for the simultaneous operation of three computers in a network, this speed is quite enough.

If we return to thunderstorms and short circuits, then often together with the modem, the network card also fails, if only it suffers, then it is enough to buy and install a discrete one. For example, I bought this one:

But a year ago, not only did the network card burn out, but the motherboard stopped turning off the computer: the OS stops working, and all the fans spin and the power does not turn off, not a pleasant moment, although this motherboard is still working in the second computer. Now I'm thinking about giving up the wired connection because of this, buying a Wi-Fi adapter and connecting the stationary computer to the modem through it, I think under the given circumstances, this is more reliable. Although the TD-W8961ND has lightning protection up to 4000V, it is not known how it will work, and I do not want to check it specially)).

Conclusions.

An excellent, functional device for connecting to the Internet using ADSL technology for the whole variety of my devices: computers, laptops, smartphones, iP television, smartTV, a multimedia set-top box from WD.

Large area of ​​wireless coverage: the whole house and the surrounding area.
Plus, I share the internet with my neighbor.

The connection is secure, protected by various encryption modes, firewall, filtering by MAC addresses and IP addresses is possible.

The settings are intuitive, not complicated, my experience I think will help you with this, the instructions are quite detailed.

And all this for just one and a half thousand rubles on average, even taking into account the fact that it will last only a year, until the next thunderstorm, and the lightning protection will not work, not so much.

All successful connections and "not a single break"!

Access to the World Wide Web through wireless routers is gaining popularity. Every third user has their own wifi installed at home. The router is purchased in a store, but some providers offer it to new subscribers upon connection, and provide assistance in setting up.
TP-Link TL-WR740N web interface - everything is simple and clear

However, there are situations, whether it is a hardware failure, or a change of service provider, when it is necessary to make adjustments to the device, but there is no desire to wait for help from technical support, or the user does not have sufficient knowledge for this procedure. But we have been learning something new all our lives, having studied the presented material to the end, the user will be able to independently configure a Rostelecom router.

In most cases, tp link router can be configured in 30 minutes, but without knowing the step-by-step instructions, this process may become impracticable. Given that the presented equipment is popular at home, even a housewife can perform the steps below, and the result will be an organized wireless home network.

Picture 1

The nuances of connecting equipment

First, you need to make a reservation that it is easier to set up a tp link router using a wired connection than using a wireless network. If you turn the equipment with the back side towards you, then you can find 5 outputs. One colored blue is the WAN port, the other yellow are LAN ports. Rostelecom connects to the Internet by connecting the blue port with the Internet cable, and the equipment is connected to the computer through the yellow port with another wire (look in the box with the router):

Picture 2

That's the whole connection procedure. Further work depends on the settings.

How to set up a router Rostelecom TL-WR740N

The market is rich and everyone is practicing their own way of customizing equipment. When concluding a service agreement between the provider and the user, the first one provides him with the necessary information, namely: login parameters, IP address, and so on. And now in more detail about how to set up the Internet with Rostelecom in the correct sequence.

Attention to users! Before making adjustments and setting up the equipment, carefully study the points below, this will save you from possible connection problems.

• if the user configured the Internet by Rostelecom on a PC to access the network or a high-speed connection was established, it must first be turned off and no longer used. When the router is connected to the computer, the equipment will independently perform this function;
• if you previously used an ADSL modem connection to your provider, and there were no other connections, then the above steps do not need to be performed.

Further actions are performed in the browser. To do this, the user launches a browser and goes to the authorization page of the equipment supplier through the entered address: tplinklogin.net or through the IP. Then press the enter key. Rostelecom's wifi router is activated by entering a username and password. If you do not know this data, then carefully examine the box, there is a sticker where ADMIN is indicated. We enter the same words in both columns and press the enter button and get to the main page of the manufacturer:

Figure 3

Here the modem is configured by Rostelecom with wifi. There may be a problem with the display of the page when connecting (it is not available), which means that the user has incorrectly configured the local connection. It is recommended to specify automatic retrieval of DNS and IP settings.

If everything is working properly, then you can describe in more detail how to connect a tp link wifi router.

The user selects the "Network" column located on the left side of the window and define the WAN connection, then write the parameters as in the screenshot:

Figure 4
Everything that remains is not subject to change. After that, click on the save button and select the "Connect" option. After a couple of seconds, we update and see that the connection status has changed to active.
That's it, this completes the setup, then you need to make security adjustments.

The functioning of Rostelecom consists in the use of modern technical equipment capable of providing comfortable conditions for using high-speed access to the World Wide Web. Configuring the TP-Link Rostelecom Router is a pressing issue among telecom operator users who have become the owners of a modern technical device. Initial installation, replacement, or activation of additional options may lead to the need for self-tuning. The process can be performed independently, for this you will need to follow the step-by-step instructions, which we will consider in the material.

The main attention will be paid not only to the general aspects in setting up the current generation of devices, but also to specific models. Installing a configuration may require both working with the technical component itself and downloading additional software from official sources.

The line of ADSL modems is rapidly updating, which contributes to increasing the maximum data transfer speed and introducing new technologies for everyday use. This policy makes it necessary to perform independent connection and configuration of equipment. The connection to the transmission line is made in the classical way. Beforehand, it is recommended to check the correspondence of all ports and the presence of power supply. When active, the corresponding LED on the TP-Link modem line will light up.

Further actions can be as follows:

• configuring Wi-Fi connection and other device parameters using the integrated control panel;
• connecting the modem to a computer, TV and other devices using a classic Ethernet cable or wirelessly;
• installing the appropriate drivers and setting up an Internet connection.

Each of the above points is necessary for consideration, which will reduce the time for configuration and preparation of equipment for everyday use. Modern models have received the most simplified interface and the ability to automatically configure, which will be a pleasant bonus for users. The ability to independently change the parameters in the classical way is preserved.

Configuring a TP-Link tl wr841n router for Rostelecom IPTV and Internet

TP-Link TL-WR841N has received the status of a "people's" router, due to its value for money. For a small cost, the client gets the ability to connect up to 4 devices using an Ethernet cable, as well as organize an 802.11n Wi-Fi access point. In this case, the connection speed can reach 300 Mbps and varies depending on the characteristics of the communication channel. 2 antennas enhance the signal coverage area. A detailed list of technical and software specifications can be found on the corresponding page of the manufacturer's official website.

Considering how to configure a TP-Link router for Rostelecom, we can distinguish traditional actions: the user will need to connect the device to a computer or laptop using the Ethernet interface. Now you can turn on any convenient browser and enter the request 192.168.1.1 in the address bar, after which you will be redirected to the control panel interface. Here you will need to go through the authorization process: the admin combination acts as a standard login and password, however, it may vary depending on the specific version and the dealer. You can find out the login parameters in the documentation or on the sticker located on the underside of the device. In the window that appears, you can configure Wi-Fi and other modem functions in detail.

How to configure TP-Link td w8961n router for Rostelecom

The modern technical device has not only an attractive futuristic design, but also support for ADSL2 + transmission technology, which allows to increase the speed of information packet exchange, latency and other network parameters. Traditionally, up to 4 computers or other similar devices can be connected to the receiver via the Ethernet connector. Wireless transmission works in the 802.11n standard, supporting speeds up to 300 Mbps. 2 powerful antennas provide a good coverage area, which creates a comfortable working environment even in a large apartment. Additionally, the client will be pleased with many additional options and modern integrated technical solutions, a complete list of which can be found on the product page on the manufacturer's official website.

As with the entire family of TP-Link routers, you can configure a wifi router in the following way:

1. Connect the modem to your computer or laptop;
2. Open your browser and enter the address 192.168.1.1;
3. Specify the appropriate combinations in the login fields (traditionally admin and admin);
4. Start activating the Wi-Fi module and setting up the streaming TV stream. Detailed information on the technical capabilities of the service is provided in the official documentation.

How to configure TP-Link td w8901n router for Rostelecom

This inexpensive router supports connection to the ADSL2 + network, which allows up to 4 devices connected via Ethernet to work comfortably. Wi-Fi hotspot capability is still there, with 1 powerful antenna and support for the popular 802.11g format to meet customer needs. The power of the gadget is enough to ensure a stable connection in the apartment. Despite its low cost, the model is distinguished by a set of many additional software and technical capabilities.

As with other models of the T-Link family, the user will need:

• Connect td w8901n to your computer or laptop;
• Open a browser and enter the address 192.168.1.1 into the search bar;
• Specify login parameters, which are set to admin and admin by default;
• Proceed with further configuration.

Having figured out how to set up a TP-Link modem for Rostelecom, you can set a password and priorities for a Wi-Fi connection. The work of other options can be viewed in the technical section of the manufacturer's official website.

Configuring a TP-Link td w8960n router for Rostelecom in Russian

The modern device is distinguished by its affordability, unusual design and the use of modern technologies. The connection to the data transmission line is made according to the ADSL2 + standard, and the wireless access point operates on the 802.11n technology. 2 antennas provide an extended and stable coverage area, which will be a pleasant factor when installing the router in a large room.

As in all the above cases, the installation of configurations is done in a generally accepted way:

1. Connect TP-Link td w8960n to your computer;
2. In the browser line, enter the address 192.168.1.1, which acts as a service;
3. The control panel will require you to enter security data to enter, the basic values ​​of the login and password are admin and admin;
4. If everything is done correctly, you will be redirected to the main settings section. Here you can set up wireless configurations and manage a number of other settings.